Bat from Hobby King
6 Jan 12 - New model
completed
N° of launches / Time | 0 | 0 hours 0 mins |
Wingspan | 19.6 " | 50 cm |
Wing Area | ~168 in² | 10.8 dm² |
Flying Weight | 3.53 oz | 100 g |
Wing Loading | 3.03 oz/ft² | 9.2 g/dm² |
Wing Cube Loading | 2.8 - 'Glider' | |
Motor | C10 2900kv Brushless Outrunner (Included) | |
Propeller | GWS 4.5 x 4.0 Direct Drive | |
Batteries | 2S LiPo ~500mAh | |
Speed Controller | Turnigy Plush 6A - 2S LiPo - BEC | |
Receiver | Clone AR6110e - 6ch - 2.4GHz | |
Servos | Elevons - 2 x HobbyKing 3.7g - 0.5kg.cm - 0.1s / 60° | |
Static motor parameters | 2S 460mAh Turnigy Nano-Tech LiPo cells give 12540 RPM @ 7.40V drawing 4.17A (30.9W), which is 140W/lb. | |
Flight performance | Not yet flown |
6 Jan 12 - I have just finished this EPP foam model, which appealed to me as it is a little unusual. I was amazed that ready to fly, and with the stickers fitted, it turned out 0.1g heavier than the instructions sheet claims; and I'd used 3.7g servos instead of the specified 2.5g. The miniscule motor produces an amazing amount of thrust and will almost support the weight of the model in a static vertical position; should be fun to fly.