Hadron by Flyzone

14 Feb 15 - Model flown

Hadron - Front Quarter Hardon - Front Hadron - Side

N° of launches / Time 3 0 hrs 12 mins
Wingspan 33.5 in 850 mm
Wing Area 408 in² 26.3 dm²
Flying Weight 2 lb 2 oz 960 g
Wing Loading 12.0 oz / ft² 36.5 g/dm²
Wing Cube Loading 7.1 - Just above 'Trainer'
Motor Pre-installed unknown
Propeller 3-blade approx 16.5" x 10"
Speed Controller Pre-installed unknown 60A
Motor Batteries Pre-installed unknown 10A UBEC
Receiver OrangeRx R910 - 9Ch - 2.4Ghz - TwinPort (Spektrum DSM2 compatible) with 2 satellite receivers
Servos Ailerons 2 x Pre-installed 17g
Elevator Hitec HS-5085MG digital metal gear 22g
Rudder/Tailwheel Pre-installed 17g
Flaps 2 x Pre-installed 17g
Undercarriage 2 x Servoless twist-turn retracts plus 2 x pre-installed 9g door servos with a programmable sequencer to control the leg and door timing
Static motor parameters 4190 RPM from 19.26V and drawing 40.8A (785W), which is 87W/lb.  The RPM is low but it is quite large 3-blade propeller so there's plenty of thrust
Flight performance Flies nicely, not excessively powerful but has a good presence in the air and isn't unrealistically fat. The relatively low wing loading gives a very low stall speed

5 May 14 - During the build of this model I replaced the elevator servo for a much more powerful version as I wasn't happy with the supplied servo for this critical control.

[ Back ]  [ Electric Aircraft Index ]  [ Model Index ]  [ Home ]